DRY FOAM CARPET SHAMPOO
A concentrated blend of polymers and detergents with a pleasant fragrance provides an effective carpet cleaning shampoo which is easy to apply and can be vacuumed from the surface after drying.
PRODUCT NAME:
DRY FOAM SHAMPOO
Dry foam carpet shampoo
PACK SIZE(S):
4x5lt
The product must be diluted before use via a 30ml pelican dispensing pump fitted to the 5Lt container; for use on all carpets and soft furnishings.
- Prior to first use it is advisable to check the colour fastness of the carpet in an inconspicuous area prior to cleaning the whole carpet.
- Dry Foam Shampoo should be diluted at 6:1 with water.
- Apply by hand scrubbing with a sponge or cloth or by wet rotary machine. B. Always rinse equipment with clean water immediately after use.
- Work into rich foam, taking care not to over-wet the carpet.
- Allow the foam/soil agglomerate to dry onto the carpet then vacuum off.
- Allow the carpet to dry before reopening it up to traffic.
Caution:
Never vacuum the carpet when it is wet as this may cause an electrical fault with the vacuum cleaner or even lead to an electrical shock for the operator.
HEAVY STAINING: PRE-SPOTTING
If an area is heavily stained, a diluted solution (20:1) of Carpet Fresh can be used as a pre-spotter prior to cleaning the whole carpet. Apply to the soiled area using a 600ml spray bottle and allow the solution several minutes contact time before using the extraction machine. Always follow the recommended dilutions. Over concentration may leave the carpet slightly tacky which quickly leads to more soil re-depositing on the carpet fibres.
Not classified as hazardous, however we advise that normal hygiene practices are adopted. Wear rubber gloves when handling and avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if irritation occurs.
For further information, refer to Safety Data Sheet.
COSHH STATEMENT
COSHH is a risk management system that requires all employers to take steps to control substances (chemicals) that may cause harm to employees, contractors and visitors to the workplace. Every work environment will be different in terms of the hazardous chemicals that are present, and how these are used, and individual assessments may be necessary to consider how chemicals can be handled and stored safely, in addition to ensuring that appropriate PPE and training is provided for employees. Product SDS and Product Guidance Sheets are intended to help when carrying out a COSHH assessment, however if further advice is needed with regard to specific issues in your work environment we are happy to provide advice.
For a technical query e-mail us at: technical.solutions@rpadam.co.uk