MIRASEAL ACRYLIC FLOOR SEAL
A superb specialist acrylic floor seal, which provides tough and highly durable base coat for porous floor surfaces including vinyl, linoleum, wood, stone and some types of marble. By sealing the surface, it provides a durable base for the application of an emulsion floor polish to enhance the appearance high traffic flooring in the hospitality, education, leisure and business sectors.
PRODUCT NAME:
MIRASEAL
Acrylic floor seal
PACK SIZE(S):
4x5lt
This product is used neat and should NOT to be diluted. Use as supplied and directed. Care must be taken when applying this product and it is important to follow the directions provided. This product should not be diluted, and is used as supplied to provide a durable basecoat to the hard floor.
Pour small amounts onto the floor and apply a thin coat by mop (preferably a flat-mop) into all corners and edges first. Moving backwards from the furthest part of the room, cover the floor making your way to the door.
Lay the seal down in several thin coats, with each coat applied at a 90 degree angle to the previous coat ensuring full coverage and no patches. Each coat must be allowed to completely dry before applying the next to ensure they bond effectively.
Initial Preparation:
Mop down and clean the floor using a neutral detergent. Then remove old polish or wax using an effective emulsion polish floor stripper. Ensure the surface is perfectly dry before finally sweeping the floor to remove any dust or debris.
Application:
Apply a thin even coat using a lambs-wool applicator or suitable flat-mopping system to ensure even coverage. Allow this coat to dry completely before applying a second coat. The seal will dry to a durable finish in approximately one hour if the room is well ventilated. Low temperatures or poor air circulation will slow the drying time. The floor can then be treated with an emulsion floor polish.
Not classified as hazardous, however we advise that normal hygiene practices are adopted. Wear rubber gloves when handling and avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if irritation occurs.
For further information, refer to Safety Data Sheet.
COSHH STATEMENT
COSHH is a risk management system that requires all employers to take steps to control substances (chemicals) that may cause harm to employees, contractors and visitors to the workplace. Every work environment will be different in terms of the hazardous chemicals that are present, and how these are used, and individual assessments may be necessary to consider how chemicals can be handled and stored safely, in addition to ensuring that appropriate PPE and training is provided for employees. Product SDS and Product Guidance Sheets are intended to help when carrying out a COSHH assessment, however if further advice is needed with regard to specific issues in your work environment we are happy to provide advice.
For a technical query e-mail us at: technical.solutions@rpadam.co.uk