SAPPHIRE PLUS PREMIUM HIGH SOLIDS EMULSION FLOOR POLISH

A dry-bright, metalised emulsion floor polish containing a blend of acrylic polymers and waxes, specially formulated to provide a durable high gloss finish to porous and sealed floor surfaces including vinyl, linoleum, wood, stone and some types of marble. It protects and enhances the appearance of high traffic flooring in the hospitality, education, leisure and business sectors.

PRODUCT NAME:

SAPPHIRE PLUS

DESCRIPTION:

Premium high solids emulsion floor polish

PACK SIZE(S):

4x5lt

 

HOW TO USE

This product should not be diluted, and should be used as supplied to leave a final finish to hard floors so it is vitally important that this coating is laid correctly.

 

  • Pour small amounts onto the floor and apply by mop (preferably a flat mop) into all corners and edges first.

 

  • Moving backwards from the furthest part of the room, cover the floor making your way to the door.

 

  • Lay the polish down in several thin coats, with each coat applied at a 90 degree angle to the previous coat ensuring full coverage and no patches.

 

  • Each coat must be allowed to completely dry before applying more to ensure they bond effectively.

 

Initial Preparation:

Mop down and clean the floor using a neutral detergent. Then remove old polish or wax using an effective emulsion polish floor stripper. Ensure the surface is perfectly dry before finally sweeping the floor to remove any dust or debris.

 

Application:

Apply a thin even coat using a lambs-wool applicator or suitable flat-mopping system for even coverage. Allow this coat to dry completely before applying a second coat. The polish will dry to a high gloss finish in approximately one hour if the room is well ventilated. The floor can then be opened to traffic.

SAFETY ADVISE

Not classified as hazardous, however we advise that normal hygiene practices are adopted. Wear rubber gloves when handling and avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if irritation occurs.

For further information, refer to Safety Data Sheet.

 

For further information, refer to Safety Data Sheet.

COSHH STATEMENT

COSHH is a risk management system that requires all employers to take steps to control substances (chemicals) that may cause harm to employees, contractors and visitors to the workplace. Every work environment will be different in terms of the hazardous chemicals that are present, and how these are used, and individual assessments may be necessary to consider how chemicals can be handled and stored safely, in addition to ensuring that appropriate PPE and training is provided for employees. Product SDS and Product Guidance Sheets are intended to help when carrying out a COSHH assessment, however if further advice is needed with regard to specific issues in your work environment we are happy to provide advice.

For a technical query e-mail us at: technical.solutions@rpadam.co.uk